Opacity issue if Z not zero

cdulieu
Posts: 11
Joined: Wed Mar 13, 2019 6:43 am
Contact:

Wed Jun 26, 2019 1:17 am

When using the layer stack order to place content in front of each other opacity functions as you expect, the content becomes transparent and you can see the content behind (below) coming through.

However if you use a Z position to set the content order then rather than become transparent it fades to black. A zero opacity resulting in a black square in front of the behind content.

Is this a bug or something we’re missing?
Kind Regards
Clint Dulieu
 

Show Technology Australia
cdulieu@showtech.com.au
www.showtech.com.au
User avatar
Michael Eckschlager
Posts: 111
Joined: Thu May 11, 2017 7:09 am
Contact:

Fri Jun 28, 2019 9:47 am

Hi,

thanks for the report.
Can you let us know in what version do you have in use ?
Because I tried it out now in the latest release (1.0.15) and can't reproduce that - the layer always get's transparent.

 
Best Regards from Austria
Michael Eckschlager
_____________________________________________________
AV STUMPFL GMBH | Michael Eckschlager | Technical Support
Mitterweg 46 | A-4702 Wallern | Tel +43(7249)42811
support@avstumpfl.com | www.AVstumpfl.com
cdulieu
Posts: 11
Joined: Wed Mar 13, 2019 6:43 am
Contact:

Sun Jun 30, 2019 7:18 am

Oh sorry this is latest beta running on Pixera 2

Let me know if you can’t reproduce and I’ll send a file and a video.
Kind Regards
Clint Dulieu
 

Show Technology Australia
cdulieu@showtech.com.au
www.showtech.com.au
User avatar
Michael Eckschlager
Posts: 111
Joined: Thu May 11, 2017 7:09 am
Contact:

Thu Jul 04, 2019 10:09 am

Can you please send us the project file and a short video ?
Cause I am unfortunately not able to reproduce your situation.
Thanks a lot!
Best Regards from Austria
Michael Eckschlager
_____________________________________________________
AV STUMPFL GMBH | Michael Eckschlager | Technical Support
Mitterweg 46 | A-4702 Wallern | Tel +43(7249)42811
support@avstumpfl.com | www.AVstumpfl.com
cdulieu
Posts: 11
Joined: Wed Mar 13, 2019 6:43 am
Contact:

Sun Jul 07, 2019 2:03 am

I’m not in the office for a few days but will do so on my return.

I have been finding the issue intermittent unfortunately.
Kind Regards
Clint Dulieu
 

Show Technology Australia
cdulieu@showtech.com.au
www.showtech.com.au
User avatar
Michael Eckschlager
Posts: 111
Joined: Thu May 11, 2017 7:09 am
Contact:

Mon Jul 08, 2019 8:52 am

Ok, fine!
Just post it if you are back in the office again - hopefully we can reproduce it then.
Best Regards from Austria
Michael Eckschlager
_____________________________________________________
AV STUMPFL GMBH | Michael Eckschlager | Technical Support
Mitterweg 46 | A-4702 Wallern | Tel +43(7249)42811
support@avstumpfl.com | www.AVstumpfl.com
cdulieu
Posts: 11
Joined: Wed Mar 13, 2019 6:43 am
Contact:

Thu Jul 11, 2019 1:24 am

I've attached a video here showing the problem.
I will email the project files as funnily enough an AVP file is not a valid extension for this forum!

Basically the issue appears if you place a screen in spatial mode.
Move the content layer BELOW another but then bring the content itself back in front with Z value.

 
You do not have the required permissions to view the files attached to this post.
Kind Regards
Clint Dulieu
 

Show Technology Australia
cdulieu@showtech.com.au
www.showtech.com.au
User avatar
Michael Eckschlager
Posts: 111
Joined: Thu May 11, 2017 7:09 am
Contact:

Thu Jul 11, 2019 1:06 pm

Okay, thanks for the explanation! I'll try that out.
I've allowed the .avp extension now in the forum rules - great hint!  :)
Maybe you can try to upload your project again.
Thanks!
 
Best Regards from Austria
Michael Eckschlager
_____________________________________________________
AV STUMPFL GMBH | Michael Eckschlager | Technical Support
Mitterweg 46 | A-4702 Wallern | Tel +43(7249)42811
support@avstumpfl.com | www.AVstumpfl.com
cdulieu
Posts: 11
Joined: Wed Mar 13, 2019 6:43 am
Contact:

Fri Jul 12, 2019 1:34 am

AVP File attached

 
You do not have the required permissions to view the files attached to this post.
Kind Regards
Clint Dulieu
 

Show Technology Australia
cdulieu@showtech.com.au
www.showtech.com.au
cdulieu
Posts: 11
Joined: Wed Mar 13, 2019 6:43 am
Contact:

Thu Aug 01, 2019 8:20 am

Did you have any luck with this one?
Kind Regards
Clint Dulieu
 

Show Technology Australia
cdulieu@showtech.com.au
www.showtech.com.au
Post Reply