How to create a multi-client calibration

Everything related to our high performance and 64-bit Wings RX software.
Post Reply
User avatar
Michael Eckschlager
Posts: 111
Joined: Thu May 11, 2017 7:09 am
Contact:

Mon Jun 12, 2017 1:33 pm

This is a tutorial how to create a multi-client calibration with manual warping.
Download the pdf to get started.
How to create a multi-client calibration.pdf
You do not have the required permissions to view the files attached to this post.
Best Regards from Austria
Michael Eckschlager
_____________________________________________________
AV STUMPFL GMBH | Michael Eckschlager | Technical Support
Mitterweg 46 | A-4702 Wallern | Tel +43(7249)42811
support@avstumpfl.com | www.AVstumpfl.com
kevin
Posts: 6
Joined: Fri Mar 30, 2018 6:54 pm
Contact:

Thu Apr 19, 2018 5:22 pm

Hello Michael,

This is very informative for creating multi-client manual calibration

That leads me to the question, can I do multi-client camera based calibrations?

Specifically, if I have say 4 servers acting as clients, can I have a camera attached to each on for calibration purposes? Or am I limited to 1 camera on the Master device?

Thank you
User avatar
Michael Eckschlager
Posts: 111
Joined: Thu May 11, 2017 7:09 am
Contact:

Sat Apr 21, 2018 11:42 am

Hi Kevin,

thank you very much for your kind words!

If you want to use multiple cameras we call them a "multi-camera setup".
Basically such setup is for sure possible but it's really complex to handle and also you need some additional software for that.
Through these circumstances it's nearly impossible to do that without an AV Stumpfl technician.
Do you have a project where you need multiple cameras or where you think you need multiple ones ?
We are always pleased to discuss your project to find a suitable solution for you!

Thanks!
Best Regards from Austria
Michael Eckschlager
_____________________________________________________
AV STUMPFL GMBH | Michael Eckschlager | Technical Support
Mitterweg 46 | A-4702 Wallern | Tel +43(7249)42811
support@avstumpfl.com | www.AVstumpfl.com
kevin
Posts: 6
Joined: Fri Mar 30, 2018 6:54 pm
Contact:

Wed Apr 25, 2018 2:24 pm

Hello Michael,

I do not have a specific project coming up, but whenever I demo the camera calibration for a client that is usually one of the first questions they ask (people always want more!)

If I ever get a project that could benefit from this technique I will be sure to reach out for advice and for a solution


As always, thank you for your help and for your quick response

-Kevin
Post Reply