virtual output

Post Reply
Stefan aus Berlin
Posts: 3
Joined: Sat Sep 09, 2017 8:35 pm


I would find it useful to have "virtual" outputs for pre programming. I try to pre program a show with a complex LED setup (different sizes mapped onto different outputs). As far as I know I only can do the output mapping (like adding screen fields and rearranging them) with a present physical output.

Or did I miss something?

Thank you and best.

User avatar
Michael Eckschlager
Posts: 128
Joined: Thu May 11, 2017 7:09 am


yes that's true!
Currently it's just possible to use the mapping with a phsyical assigned output!
So adding "virtual outputs" is definitely a good feature for the future. I will add it to our feature list! ;)

Depending on the project and graphic card, you can also use a small workaround.
If you have a graphic card with an edid management you can also load edids into outputs to emulate some physical outputs.
But as said it's depending on the project (how many outputs you need) and on the graphic card.
Best Regards from Austria
Michael Eckschlager
AV STUMPFL GMBH | Michael Eckschlager | Technical Support
Mitterweg 46 | A-4702 Wallern | Tel +43(7249)42811 |
Post Reply